Contemporary-control-systems BASrouter Application Guide Manuale Utente Scaricare il pdf (Pagina 19)

AG-BASRTB00-BD0 Page 19

Application Guide — BASrouters

T R L SO

CONTEMPORARY

Setup Tab Parameters

System Default Value Description

Device Description Blank Up to 80 characters chosen by the user.

Time Default Value Description

Set Date (YYYY, MM, DD) 1970,1,1 Wireshark captures especially use this value.

Set Time (hh, mm, ss) 0,0,0 Wireshark captures especially use this value.

Username/Password Default Value Description

Username admin Up to 80 characters chosen by the user.

Password admin Up to 80 characters chosen by the user.

Cong Upload/Download Default Value Description

Select Conguration File ... Blank Browse... to a BASrouterLX conguration le, then click Upload.

Save Conguration File to PC n/a Click Save to save the current BASrouterLX conguration to a PC.

Firmware Upload Default Value Description

Select Firmware File ... Blank Browse... to a BASrouterLX rmware le, then click Upload.

Advanced Tab Parameters

BBMD Default Value Description

BBMD Enable Unchecked Check this if your BACnet communications will pass through multiple

subnets. Warning: If this is enabled when unneeded, the BASrouter will

search for nonexisting BBMDs — and so trafc efciency will suffer.

BBMD UDP Port Primary Leave this unchanged, unless your BACnet communications involve two

BACnet/IP networks.

Accept FDR Unchecked Check this if the BAsrouterLX must communicate with BACnet devices

in other subnets where no BBMD is present — and if those devices are

capable of Foreign Device Registration.

NAT Default Value Description

Secondary BACnet/IP UDP Port 0000 If routing between two BACnet/IP networks, each network must use a

different UDP Port. Enter the remote port number here.

Secondary BACnet/IP Network 0 If the BASrouterLX routes between two BACnet/IP networks, each network

must use a different network number. Enter the remote network number here.

Public IP Address 0.0.0.0 If the BASrouterLX has a non-routable local IP address (e.g., 192.168.92.68)

and communicates with BACnet devices across a rewall, enter the public

IP address of the NAT router. This will be the IP address of the remote side

of the NAT router which must be congured so that remote trafc — specied

by the Secondary BACnet/IP Network setting — is port-forwarded to the

BASrouterLX. This value is used in the Forwarded-NPDU IP Address eld.

Slave Proxy Default Value Description

Slave Proxy Enable Unchecked Check this to allow the BASrouterLX to proxy MS/TP slave devices.

Auto Proxy Enable Unchecked Check this to discover slaves automatically then click View Auto Slaves.

Manual Slave Proxy Entry Unchecked Click the Apply button to add your entry to the Slave Proxy Table.

Broadcast Distribution Table Default Value Description

BBMD IP Address Blank The IP Address of the BBMD that will communicate with the BASrouterLX.

Broadcast Distribution Mask 255.255.255.255 The BBMD subnet mask — at its default value except in the rare cases in

which the intervening IP router is able to forward broadcasts.

Delete Entry No: Blank To remove an entry from the table, enter its number then click this button.

Special Parameters for the BASrouterLX

1 2 ... 14 15 16 17 18 19 20

BASautomation 1
T R L SO 10

Commenti su questo manuale

Nessun commento

Contemporary-control-systems BASrouter Application Guide Manuale Utente Pagina 19

Commenti su questo manuale

Prodotti e manuali riguardandi Hardware Contemporary-control-systems BASrouter Application Guide