Contemporary-control-systems BASrouter Portable Installation Guide (Firmware 2. Manuale Utente

BASRTP-B Portable BACnet® Multi-Network Router Installation Guide TD070210-0IG For Firmware Versions 2.6.x

TD070210-0IG 10 5 Webpage Configuration Each router contains an interactive web server, accessible from any Internet-compatible PC on the local ne

TD070210-0IG 11 Figure 9 — Steps for Changing the IP Address of the PC Used for Setup On some systems, this option is: “My Network Places”.

TD070210-0IG 12 After entering the router’s IP address into your browser’s address field, you will see the Router Configuration Page with the defaul

TD070210-0IG 13 Device Parameter Device Name (Default Value = BASRTP-Bxxxxxx) The BASrouter’s Device Object Name can be configured in this field.

TD070210-0IG 14 NOTE: Although they may share the same Ethernet physical network, BACnet Ethernet devices and BACnet/IP devices must have their own

TD070210-0IG 15 MS/TP Parameters MS/TP MAC (Default Value = 00) This is the 8-bit (0–127) MAC address of the router’s MS/TP port, in decimal. Lower

TD070210-0IG 16 MS/TP Baud Rate (Default Value = 9600) The baud rate of the MS/TP network can be 9600, 19200, 38400 or 76800 bps. All MS/TP devi

TD070210-0IG 17 The Status Screen refreshes automatically — so you can watch the router MS/TP state change and gain insight into the condition of th

TD070210-0IG 18 6 Warranty Contemporary Controls (CC) warrants this product to the original purchaser for two years from the product shipping date.

TD070210-0IG 19 [This page is intentionally left blank.]

TD070210-0IG 2 Trademarks Contemporary Controls, ARC Control, ARC DETECT, EXTEND-A-BUS, RapidRing, and CTRLink are trademarks or registered tradem

TD070210-0IG 20 [This page is intentionally left blank.]

TD070210-0IG 3 Contents 1 Introduction ... 4 2 Specifications ...

TD070210-0IG 4 1 Introduction The BASRTP-B is a multi-network router, sharing messages among BACnet/IP, BACnet Ethernet and MS/TP networks. The rou

TD070210-0IG 5 2 Specifications Electrical INPUT USB (Type B Port) Voltage (V, nominal): 5 VDC Current (mA, typical): 300 Power: 2.5 W Environ

TD070210-0IG 6 Connectors 3-pin (MS/TP) Pin Assignments (Also explained on product label) RJ-11 (MS/TP) Pin Assignments 2 RT – 4 SC 5 RT + (All

TD070210-0IG 7 3 Power The BASRTP-B features a USB 2.0 Full Speed Device Port that accepts the USB cable with Type B plug that is included in the bo

TD070210-0IG 8 Figure 6 — 3-wire MS/TP Bus Wiring

TD070210-0IG 9 4 Operation MS/TP Port The MS/TP port uses an isolated EIA-485 transceiver that is connected to both a removable 3-pin connector (Fig