
Mechanical
LED Indicators
The “PWR” LED glows solid green when the unit is properly powered. Each Ethernet
port has two LEDs: LED “L” glows solid if a valid link exists, flashes for activity and
shows data rate by colour: green for 100 Mbps or yellow for 10 Mbps. For full-duplex,
the “D” LED is green; for half-duplex it is unlit — but flashes if a collision occurs.
Specifications
Environmental
Operating Temp: 0°C to +60°C
Storage Temp: –40°C to +85°C
Humidity: 10–95%, non-condensing
DIN-rail Mounting TS-35
Regulatory Compliance
CE Mark; CFR 47 Part 15, Class A
UL508 Industrial Control Equipment
Functional
Compliance: ANSI/IEEE 802.3
Data Rates: 10 and 100 Mbps
Signalling: 10BASE-T and
100BASE-TX
RJ-45 Pin Assignments
Pin Function
1 TD+
2 TD–
3 RD+
6 RD–
(other pins are unused)
USB Pin Assignments
Pin Function
1 +5V
2 –Data
3 +Data
4 Ground
Commenti su questo manuale