Contemporary-control-systems BASremote User Manual (firmware 3.1.x) Manuale Utente Scaricare il pdf (Pagina 43)

TD040300-0MF

6.3.6 Thermistor Input Configuring

You can define any channel 1–6 as a Type II or III thermistor input as shown in Figure 29 which

uses a Type 3 thermistor and Channel 1 as an example. The channel BACnet type will be

Analog Input. On this screen, you can adjust any of the following parameters.

Channel Type You can select a Type II or Type III thermistor profile.

Channel Name You can name the channel using no more than 63 characters. This

will be the object name for this channel (followed by the channel

number). For example, “Thermistor Input-1”.

BACnet Unit Group The Temperature default can be set to any option in the list.

BACnet Unit Value Set the DEGREES_FAHRENHEIT default to any option in the list.

Available options depend on the BACnet Unit Group you specify.

BACnet COV Increment Once the channel value changes by this amount (up or down), a

COV message is sent to subscribers.

BACnet Description You can enter any string using no more than 63 characters.

Offset You can specify a (+) or (–) number of degrees offset — if, for

example, the thermistor in use is known to be delivering an

inaccurate reading. Either type of thermistor can normally measure

from 40º and +110º Fahrenheit.

Temp Units The Fahrenheit default scale can be changed to Celsius.

Figure 29 — Thermistor Input Configuration

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 77 78

Nessun commento

Contemporary-control-systems BASremote User Manual (firmware 3.1.x) Manuale Utente Pagina 43